Double Effect Exhaust Gas Driven Absorption Chiller-Heater
CHP Double Effect Exhaust Gas Absorption Chiller-Heater
50~2,000RT (176~7,033kW)
Exhaust Gas: 250~600℃
Low exhaust gas pressure loss
Achieved pressure loss lower than 150mmAq, by adopting high-finned tubes in the generator
Safe hermetic, spring return diverter valve
When the chiller is not working, or even shut down by black out, the diverter valve completely close and prevent hot gas getting into the chiller
Applicable to low-quality exhaust gas
Exhaust gas containing much dirt can be used by installing smoke type tubes
High delta T heat recovery
Low exhaust gas outlet temperature down to 120℃, achieved by the exhaust gas heat exchanger installed through outlets of high-temperature generators. In this way, the temperature of exhaust gas drops to 120℃, maximizing the efficiency of chillers through raising gas(oil) and exhaust gas heat recovery.
Stable chilled water leaving temperature
Equipped with an inverter control system which provides precise part-load control of absorbent solution flow rate, securing stable chilled water leaving temperature
Reference
Australia Qantas (Sydney Airport), Bangladesh INCEPTA Pharmaceuticals, Ismail Textile, Germany IBM Ehningen, Giessen Hospital
High-efficiency exhaust gas absorption chiller-heater cooling cycle
High-efficiency exhaust gas absorption chiller-heater heating cycle
