As die casting with corner joint aluminum and then sanding was performed, the outer appearance is beautiful. An insulating material made with EPDM was attached to the inner corners. This product is structured to be easily assembled and disassembled.
aluminum was compressed to make the products light and strong, so they work as frames and fix panels. When it is hot and humid like during the rainy season, insulation materials made with EPDM can be attached to the inner sides of the profile to prevent heat transfer.
Located between medium profile panels, they strengthen and fix panels. Insulation materials made with polyethylene are attached to the inner sides of the profile to prevent heat transfer.
MINI PLEAT-type MED.FILTER
Filters are thin and result in little pressure loss. Attached dust isn’t scattered again. Performance is maintained in an even and steady manner through spouting a ribbon material, polyvinyl chloride resin, to maintain fixed intervals.
Coils with 1/2" copper pipes are applied to coil air volume 560cmm and coils with 5/8" copper pipes are applied for coils with larger air volumes. The SINE WIVE-shaped fins are made to minimize resistance to air flow and maximize surface area.